Walkie; Walkie/Rider Pallet Truck
Electric 24 Volt
6000 / 8000 lbs
(2720 / 3630 kg)
Applications:
Manufacturing & Warehousing
Features & Options:
(roll over a highlighted area to see more)
PWX/HWX...The foundation of the CLARK Powrworker® line continues to set the standard for rugged dependability since its introduction as the industry's first hydraulically powered low-lift in 1920.
Drive Unit
Quiet, Low Maintenance Operation
- Spiral bevel gears are immersed in an oil bath and sealed in a heavy-duty case
Heavy Duty Ball Bearing Able to Endure High Shock
Enclosed Electromagnetic Brakes
Spring Applied / EM Release
- No master cylinder, no seals, no hydraulic fluids = no leaks
Double Acting
- Brakes engage with handle up or down
Automatically Applied
- Parking brake is automatically applied when the truck is stopped and the handle is released
Hydraulic System
Single Assembly System
- The integral pump, motor and reservoir assembly does not require a breather cap – eliminating a potential leak site and point where dirt can enter the system
AC Motor/Control
Fully Enclosed
- Keeps out dust and contaminants
- Wet environment is not an issue
- Better suited for food processing
No Brushes to Change or Commutator to Turn… Ever
- Routine brush changes are eliminated
- No need to pull the motor to turn and undercut the commutator
- Much less likely to burn-out motor during a stall
Two Forms of Regenerative Braking
- Change of direction (proportional to accelerator position)
- Throttle release (proportional to accelerator position)
Advanced Thermal Protection
- Prevents heat damage to the motor and control
Rugged Frame and Forks
- Heavy duty, welded & formed steel plate protects from impact damage and extends the life of the truck
- Forks incorporate formed steel toes plus entry and exit rollers for improved pallet handling
Lifting Mechanism/Undercarriage
Pull Rods
- Adjustable to maintain proper fork height over the life of the unit
- Constructed from steel bar stock for maximum strength and durability
Bronze Bushings
- Extreme-duty bronze bushings are used at lift linkage pivot points
Spring-loaded Stability Casters
- Maintains contact on uneven surfaces
Elevation Brackets
- Three-lug design reduces binding and promotes longer pin and bushing life
- All pivot points are greaseable and feature steel backed bushings
Steer/Control Handle
Operator Control
- Handles are available with either twist grip or thumb operated control
Toggle Switch
- Allows the operator to choose low or high speed range based on the application
Minimal Steering Effort
- Low mounted steer handle on the PWX provides increased leverage
Ample Foot Room on Rider Platform
- Top mounted handle on HWX
Pallet Entry/Exit
Pallet Entry/Exit
- Entry and exit rollers plus tapered slides improve pallet entry and exit
